Basic Electronics and PCB Design : -To learn any system one should go for its basics first.Electronics is vast field. It mostly consists of circuits , components, wires etc.In order to build circuits, you will need to become familiar with a few basic components.In this course you will learn basic electronics along with its frequently used components which are  used for building of electronic circuit. In this you will learn circuit design along with its testing .   A printed circuit board (PCB) mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-conductive Substract Components (e.g. capacitors, resistor or active devices) are generally soldered on the PCB. Advanced PCBs may contain components embedded in the substrate. PCBs can be single sided (one copper layer), double sided (two copper layers) or multi-layer (outer and inner layers). Conductors on different layers are connected with vias Multi-layer PCBs allow for much higher component density.Printed circuit boards are used in all but the simplest electronic products

Basic Electronics and PCB Design This training course is about learning linux, and hardware interfaces which includes lots of sensors and other interfaces. Kindly check the detailed syllabus below


Basic Electronics and Pcb Design 

Course Contents

Basic Concepts

Basic Electronics Concepts, AC DC and all design related concepts related to electricity and electronics. Component Identification. Working of components and basic idea of use. Use of Digital Multi meter. Concept of Circuit designing, component selection. Breadboard introduction

Power Supply Design

Transformer, Rectifier, Practical circuit of Rectifier, voltage regulator, power supply, Regulated Power Supply, Fixed And variable power supply Design

Transistorized switching and drivers

Transistor theory, NPN and PNP transistorized switching ULN2803 High Current Driver IC , Field effect transistors(FET), MOSFET, Relay Theory, basics of relay switching,L293D Driver

Sensors, motors and timers

Proximity sensors, Light Sensor, sound Sensor, Dc motor and its applications, IC 555 and its applications

Printed Circuit board Design

Layout and Artwork design, PCB making, Etching and drilling, Mounting, soldering.


Based on Basic Electronics and Pcb Design

Projects around all the Interfaces studied


  • Diploma
  • Engineering Students
  • 12th and Graduation Students


What you will learn?

  • Basics of Basic  Electronics and Pcb Design
  • Project Making With different circuits
  • Electronic Components and their Applications
  • Circuit designing
  • PCB Designing and PCB making
  • PCB Production data
  • 4 Weeks
  • Daily 90 Min Session
  • Any 10th 12th Passed Out
  • Any Diploma Students
  • Any B.E Students
  • Morning 9.30 to 11.30
  • Afternoon 3.00 – 5.00
  • Evening 6.00-7.30
  • A Course Completion Certificate
  • A Soft Copy Of Course Manual

Video Gallery

Yes, I'm Interested, tell me more

8 + 4 =